The CAT range offers significant advantages over the competition.
CAT is a German Company who build quality, robust products with up to the
minute electronics and top specifications at very affordable prices and
by using only premium components, ensure their reputation for reliability
and long life expectancy.
The product range starts with simple, yet robust equipment suitable for
school or college applications, with more specialised units available for
University, industrial and research applications.
The range includes high shear homogenisers, overhead mixers, magnetic and
hotplate magnetic stirrers, shakers and heated shakers, tube rollers and
vortex mixers plus bottle top dispensers and ceramic pumps.
 The
High-efficiency overhead stirrer range offers 9 electrical drive motors,
this means there is a suitable drive for your application; Most offer built-in
electronic speed controls and the option of digital speed display, with
mixing speeds between 100 to 3,000 RPM. The larger motors are available
with microprocessor controls and RS232 interfaces to allow independent
computer control or the recording of absolute or relative torque or power
output. The most powerful of our CAT overhead stirrers can mix up to 200
litres and produce 600 Ncm of torque, with an speed range of 10 – 500 RPM.
 The
high shear homogenisers range with 7 electrical drive motors and 2 air
driven units for hazardous areas, means there is a suitable drive for your
application; Most offer built-in electronic speed controls and the option
of digital speed display, with mixing speeds of up to 29,000 RPM. All CAT
homogeniser shafts feature unique slanted rotor slots for better and faster
processing efficiency without excessive heat build-up. Shafts available
from 6 mm Dia to 42 mm Dia, as either sealed unit with ceramic seals for
mixing under pressure or vacuum or fitted with Teflon bearing for mixing
where aeration is not a problem.
A special pre-cutting rotor is available in all shaft sizes for homogenising
stringy or fibrous materials.
 The
Magnetic Stirrer and Hotplate Magnetic Stirrer range offers hotplates in
Stainless Steel, Aluminium and Ceran®, most are microprocessor controlled
and can offer fuzzy logic and RS232 interface.
The range starts with small fixed speed stirrers, up to industrial sized
units capable of mixing 100 litres with microprocessor controls and fuzzy
logic. We can offer a CAT unit to suit your application and keep within
your budget.
CAT Liquid handling, from small hand operated bottle top dispensers up to
automatic high precision micrometering systems using Ceramic pumps, CAT
offers systems to suit your budgets.
Shakers and Heated Shakers, from single tube vortexers through to platform
shakers, tube rollers and vortexers, CAT offers simple cost effective solutions.
Why lose most of your bench top for a shaking incubator to control sample
temperatures when CAT offer a simple Shaker Heater system at a very competitive
price and you still keep most of your bench top?
The full range includes:
Hotplate
Stirrers, Magnetic Stirrers and Hotplates
Shakers,
Shaking Heaters and Mixers
Overhead
Stirring Motors
Liquid
Handling and Pumps
Homogenisers
Shakers, Shaking Heaters and Mixers
Hotplate Magnetic Stirrers (stainless
steel cases, temperature range: 40 - 300C)
| Unit |
Description |
Watts |
Rpm |
| MCS66 |
microprocessor
controlled, LCD display, programable multistep timer, safety temp.,
temp.ramps, Eloxal hotplate, membrane keyboard, PT-100 connector,
KTA¹ |
550 |
60-1600 |
| MCS67 |
same as above
but with Ceran® hotplate |
650 |
60-1600 |
| M26 |
µP controlled,
a-numeric LCD display, Eloxal hotplate 2 independant safety circuits,
connector for PT-100 sensor programable: timer, safety temp., temp.ramp.
KTA¹ |
550 |
60-1600 |
| M26-PC |
same as above
but with RS232 interface |
550 |
60-1600 |
| M17.5 |
µP-controlled,
4 digit temp. LED display, Ceran® hotplate, connector for PT100
probe, KTA¹ |
650 |
60-1600 |
| M16.5 |
same as M17.5,
but with stainless steel hotplate |
550 |
60-1600 |
| M16.6 |
same as M17.5,
but with eloxal hotplate |
550 |
60-1600 |
| M11 |
electronic
feed-back speed control, st. steel hotplate, KTA¹ |
550 |
80-1600 |
| M12 |
electronic
feed-back speed control, Eloxal hotplate, KTA¹ |
550 |
80-1600 |
| M13 |
electronic
feed-back speed control, Ceran® hotplate, KTA¹ |
650 |
80-1600 |
| M6 |
electronic
feed-back speed control, Ceran® hotplate |
650 |
80-1600 |
| M6.1 |
electronic
feed-back speed control, st. steel hotplate |
550 |
80-1600 |
| M6.2 |
electronic
feed-back speed control, Eloxal hotplate |
550 |
80-1600 |
| ECM6 |
compact low-energy
stirrer, Eloxal hotplate |
160 |
10-1200 |
| KM16.4 |
magnetic stirrer/heater
for round-bottom flasks of 100, 250 or 500 ml, feedback control
for temp. & speed |
550 |
60-1600 |
| KM16.7 |
magnetic stirrer/heater
for round-bottom flasks of 1000, 2000 ml, feedback control for
temp. & speed |
550 |
60-1600 |
Magnetic Stirrers (with stainless
steel cases)
| Unit |
Description |
Watts |
Rpm |
| M30 |
electr. feed-back
speed control, volumes up to 100 liters |
65 |
60-1000 |
| M20.20 |
electr. feed-back
speed control, volumes up to 50 liters |
65 |
80-1200 |
| M15 |
opto-electronic
speed control |
40 |
60-1600 |
| M5 |
stirrer with
electronic feed-back speed control |
40 |
80-1600 |
| ECM5 |
compact low-energy
stirrer, electronic speed control |
6 |
10-1200 |
| ECM2 |
compact stirrer
for cell treatment, low speed range |
6 |
2-200 |
| M2 |
small lightweight
stirrer, fixed speed, pp - housing |
4 |
500 |
Note 1: KTA: With connector for electronic and standard contact
thermometer. All microprocesssor controlled instruments are also available
with an RS232 interface.
Hotplates and Heaters (usual temperature
range: 40 - 300°C thermostat controlled)
| Unit |
Description |
Watts |
| H3 |
Ceran® hotplate
140 x 140 mm |
600 |
| H3.1 |
Stainless steel
hotplate 130 mm dia |
500 |
| H4 |
Sandbath for
sand, oil or other fluids, 1 ltr st. steel bath |
600 |
| H30/30 |
Aluminium hotplate,
300 x 300 mm |
2000 |
| H30/30C |
Ceran® hotplate,
otherwise same as H30/30 |
2000 |
| H30/45 |
Aluminium hotplate,
200 x 450 mm |
2000 |
| H30/45C |
Ceran® hotplate,
otherwise same as H30/45 |
2000 |
Back to product list
Shakers, Shaking Heaters and Mixers
| Shakers |
| Unit |
Description |
Frequency |
| S50 |
Wrist-action shaker for up to 8 Erlenmeyer
flasks of 500 ml each, feed-back speed control, 60 min timer, 120W |
100 - 800 |
| S20 |
Multi-use orbital shaker, electronic
feed-back speed control, 3 mm amplitude, 0 - 60 min timer, 40W
to be combined with the following shaking adaptors: |
80 - 1000 |
| S 20 shaking adaptors: |
| |
E - shaking-adaptor for single hand held
vessels |
|
| |
S - platform with adhesive mat, to hold
petri dishes and similar items (200x400) |
|
| |
V - shaking-adaptor for either 4 Erlenmeyer
flasks or round-bottom flasks |
|
| |
U - universal shaking-adaptor, 2 rubber
rollers to hold Erlenmeyer flasks |
|
| |
R - test tube shaking-adaptor to hold
36 test tubes of up to 16 mm o.d., variable from vertical to 45° inclination |
|
| |
| VM2 |
Vortex mixer for up to 30 mm o.d. test
tubes, continuous or touch operation, feed-back speed control |
0 - 2800 |
| VM3 |
Vortex mixer for up to 30 mm o.d. test
tubes, continuous or touch operation, feed-back speed control |
0 - 2800 |
| VM4 |
Universal vortex mixer for test tubes,
microcentrifuge tubes and microtiter plates, timer controlled and
touch operation, feed-back speed control |
0 - 2800 |
| Shaking Heaters |
| Unit |
Description |
Frequency |
| SH26.0 |
Shaking heater for 4 microtiter plates,
high precision temp. control from ambient to 95°C in steps
of 0.1°C. Programmable over-temperature cut-out. Optical control
via a 2 x 16 character alpha-numeric LC display. Protection against
unattended changes on set temperature, safety temperature and switch-off
timer. |
50 - 1100 |
| SH26.1 |
same as SH26.0. Customer can choose from
pick ups for MTP or Eppendorf tubes and with RS232 interface. |
50 - 1100 |
| SH26.2 |
same as SH26.1. Full computer control
and special indexing mechanism which stops platform always at defined
position |
50 - 1100 |
| SH26.4 |
Shaking and heating up to 160°C,
2 heating blocks for 24 reagent vessels of either 1.5 or 2 ml |
50 - 1100 |
| ST5 |
Bidemensional shaker, flat tray 420 x
350 mm, oscillation angle at 3, 6, 9 and 12°, electronic speed
control |
10 - 100 |
Heating blocks for a greater variety of microplates are
available upon request.
| Horizontal Mixers |
| Unit |
Description |
Watts / RPM |
| RM5-40 |
5 rollers synchronous rocking and rotating
tube mixer |
45 / 35 |
| RM5-6 |
same as above but slow speed |
6 / 6 |
| RM5-V |
same as above but variable speed |
6 / 0.3 - 5 |
| RT20 |
rotating and swaying mixer for 20 test
tubes up to 15 mm o.d., exchangeable tube holders |
6 / 5 - 6 |
| RT60 |
rotating and swaying mixer for 60 test
tubes, 12, 15 and 18 mm o.d. |
6 / 5 - 6 |
Back to product list
Overhead Stirring Motors
| Unit |
Description |
Watts |
Rpm |
| R100CT |
The "bull" of
CAT high torque stirring motors applies up to 600 Ncm torque at
speeds of 10 - 500 rpm. Ideal for medium to high viscous media
10.5 mm chuck, hollow shaft, µ-controller and alpha numeric
display of mechanic power, torque and timer. |
220 |
10 - 500 |
| R100C |
Powerful stirring
motor (150 Ncm) for laboratory and pilot-plant use, 10.5 mm chuck
with hollow shaft, microprocessor, speed and torque display, timer,
RS232 |
220 |
40 - 2000 |
| R100CL |
Same as R100C
but with 250 Ncm torque and speed range of 20 - 1100 rpm. This
unit is also available with a seperate control box. |
220 |
20 - 1100 |
| R100SD |
Same as above
but with 4 digit LED speed readout. Max. torque 100 Ncm. Hollow
shaft and precision chuck at 10.5 mm. |
180 |
40 - 2000 |
| The R100 series
is designed for stirring jobs up to 200 litres (related to water);
ideal for medium to high viscous media 1,000 - 50,000 mPas.
We also offer units with other speed ranges up to 6000 rpm. For
further information please contact us directly. Accessories include:
special stand for all R100 overhead stirrers, special clamp, essential
for all R100 overhead stirrers. |
| R50D |
High torque
stirrer (50 Ncm) for lab use, adjustable hollow shaft, 10.5 mm
chuck, electronic speed control/display. |
120 |
30 - 1600 |
| R50 |
Same as R50D
but without speed display. |
120 |
30 - 1600 |
| R18 |
Laboratory
stirrer (18 Ncm) electronic feedback control. |
120 |
100 - 2000 |
| R17 |
Laboratory
stirrer, steplessly adjustable speed. |
40 |
100 - 2000 |
| R2 |
Mini-stirrer,
fixed speed, stainless steel stirring paddle. |
3 |
750 |
| R1 |
Hand stirrer,
battery powered, for use with disposable stirring rods and special
stainless steel stirring blades. |
|
2500 |
Stirring Paddles
| Propeller
Stirrer 4 Blade |
| Length (mm) |
Shaft Diameter(mm) |
Paddle Diameter (mm) |
| 400 |
6 |
50 |
| 400 |
8 |
50 |
| 400 |
8 |
100 |
| Propeller
Stirrer 3 Blade |
| Length (mm) |
Shaft Diameter (mm) |
Paddle Diameter (mm) |
| 300 |
6 |
50 |
| 400 |
6 |
50 |
| 500 |
6 |
50 |
| 300 |
8 |
50 |
| 400 |
8 |
50 |
| 500 |
8 |
50 |
| 300 |
10 |
100 |
| 400 |
10 |
100 |
| 500 |
10 |
100 |
| Centrifugal
Stirrer 2 Blade |
| Length (mm) |
Shaft Diameter (mm) |
Paddle Diameter (mm) |
| 300 |
8 |
90/15 |
| 400 |
8 |
90/15 |
| 500 |
8 |
90/15 |
| 300 |
10 |
90/15 |
| 400 |
10 |
90/15 |
| 500 |
10 |
90/15 |
| Blade Stirrer
3 Hole |
| Length (mm) |
Shaft Diameter (mm) |
Paddle Diameter(mm) |
| 300 |
8 |
70 |
| 400 |
8 |
70 |
| 500 |
8 |
70 |
| 300 |
10 |
70 |
| 400 |
10 |
70 |
| 500 |
10 |
70 |
Further stirring blades available on request
Back to product list
Liquid Handling and Pumps
Dispensing Units
| Unit |
Description |
| Liquid processor |
System comprising
a bottle-mounted dispensing unit for precise dispensing, pipetting,
diluting, sampling and time controlled operations, microprocessor
controlled programming keypad, with 2 line alpah-numeric LCD display,
RS232 interface, handles volumes from 10 l to 100 ltr
Optional: remote dispensing hand-set. |
| Contiburette
10M |
Motor-driven
burette, 0.01 ml – 9999.99 ml, with connections for remote
control and power supply. |
| Contiburette
10M0 |
Same as 10M,
but without digital display and controls for use with remote controllers
C1, C2 or C4 or PC cable. |
| Contiburette
10 |
Electronic
digital burette, 0.01 ml – 9999.99 ml, hand operated version,
with 500 hr battery-powered LCD display. |
| Remote controller
C1 |
For remote
functions "run" and "10l" steps, without display. |
| Remote controller
C2 |
Remote functions "reset", "run",
and "10l" steps, digital display for dispensed volume. |
| Remote controller
C4 |
2-line a-numeric
display, microprocessor controlled for setting and read-out of
set volume and digital display of actual volume and total sum dispensed. |
Accessories: Power supplies, PC-connecting cable, remote
foot and hand switch, bottle thread adaptors, suction and ejection
cannulas - on request.
Pumps
| Unit |
Description |
| DOSCA micrometering
pump HPLH PCON C with remotable controllers |
| HPLH 20V |
High precision
micrometering pump encased in a coated steel housing, pump head
stainless steel, wetted parts are AL2O3 and
PVDF or Tefzel, flow rate: 5µl/min - 12ml/min, piston dia.
4mm. |
| HPLH 20VS |
Same as above
but with rinse port, wetted parts are AL2O3 and
PVDF or Tefzel. |
| HPLH 20VCS |
Same as above
but with special rinse port inside ceramic cylinder, parts AL2O3 and
PEEK or PFA. |
| HPLH 200V |
High precision
micrometering pump encased in a coated steel housing, pump head
stainless steel, wetted parts are AL2O3 and
PVDF or Tefzel, flow rate: 50µl/min - 100ml/min, piston dia.
6mm. |
| HPLH 200VS |
Same as above
but with rinse port, wetted parts are AL2O3 and
PVDF or Tefzel. |
| HPLH 200VCS |
Same as above
but with special rinse port inside ceramic cylinder, parts AL2O3 and
PEEK or PFA. |
| HPLH 300VCS |
Same as above,
flow rate: 100µl/min - 200ml/min, wetted parts are AL2O3 and
PEEK or PFA, piston dia. 8mm. |
| HPLH 1000V |
High precision
micrometering pump encased in a coated steel housing, pump head
stainless steel, wetted parts are AL2O3 and
PVDF or Tefzel, flow rate: 250µl/min - 400ml/min, piston
dia. 10mm. |
| HPLH 1000VS |
Same as above
but with rinse port, wetted parts are AL2O3 and
PVDF or Tefzel. |
| HPLH 20PF |
Pulse free
pump, wetted parts are AL2O3 and
Tefzel, flow rate: 5µl/min - 12ml/min. |
| HPLH 200PF |
Same as above,
wetted parts are AL2O3 and
Tefzel, flow rate: 50µl/min - 100ml/min. |
| |
|
| Multi Channel
Pumps |
Consisting
of 2 up to 8 pump units in one housing. These systems are made
upon customer request. Great variety of pump heads, also heatable,
with different kinds of rinse ports available, dosing volumes from
1µl/step up to 500ml/min. Pump heads in stainless steel,
or highly resistant plastics such as PEEK, PFA, PVDF or Tefzel.
Pump systems made from high grade AL2O3.
RS232 interface and Daisy Chaining. |
| DP04 |
Precise micrometering
lab pump with analogue flow rate control. Flowrate 0 - 2ml/min.
Flow direction: normal/reverse, piston dia. 4mm.
V-pump head made of stainless steel.
VS-pump head made of stainless steel with rinse port.
T-pump head made of Tefzel. |
| DP06 |
Same as above
but with flow rate from 0 - 20ml/min, piston dia. 6mm.
V-pump head made of stainless steel.
VS-pump head made of stainless steel with rinse port.
T-pump head made of Tefzel. |
Back to product list
High efficiency homogenisers
CAT offers a range of 9 drive motors, all supplied with variable
speed control allowing the homogenising process to start at low speed without
splashing. They differ in size, weight, power and maximum speed. Two
of the seven electronic drives have integral liquid-crystal speed displays
and there are two air driven units for hazardous areas.
- Unique slanted rotor slots for fast processing
- Improved mixing turbulence
- Interchangeable dispersing tools
- Some with ceramic shaft seals
- Exchangeable rotors and stators
- Optional continuous flow chambers
- Choice of 9 powerful drive units
- Some with integral LCD speed displays
Compressed air motors for hazardous areas
Back to product list
|
